|
SONIC DRY CLEAN'S SDC-5 MACHINE
|
Filter Cleaning Specifications
Cartridge Air Filter Cleaning Dimensions:
- Standard Maximum Outside Diameter is a 19”OD Cartridge Filter.
- Standard Minimum Inside Diameter is 3.5” ID Cartridge Filter.
- Standard Maximum Height is 32” tall Cartridge Filter.
- Standard Minimum Height is 8” tall Cartridge Filter
Cartridge Air Filter Cleaning Machine Options:
- Optional Dual Vacuum Inlets for high dust removal applications
- Optional Maximum Height is 40” tall cartridge
- Exterior Color
Patented SDC Cartridge Air Filter Cleaning Process Specifications:
- Fully Automatic Dry Cleaning Process
- Uses computerized sequences of compressed air, vacuum, vibration and rotation
- Automatically adjusts to cartridge air filters height and diameter
- Average Dirty Air Filter Cleaned in less than five minutes!
- Cleans both Inside and Outside Dirty Filters!!
- 8-10 Cleaning or More Per-cartridge using SDC Process! Synthetic Based Media can be cleaned even more!
- Fully Adjustable Cleaning Cycle Time to fit customer specific application
- Designed for Continues Duty Operation (24hr, 7days, 56 weeks per year)
Average 85,000 filter cleaning service life
- Over 600 SDC Systems in use Worldwide!
Power & Air Requirements Electrical:
- 220 volt, Single Phase, 50/60 hertz 30 amps electrical service
- L6-30 Receptacle Supplied with Machine
Compressed Air:
- 125 psi @ 150 cfm constant clean dry compressed air.
- ¾” inlet pipe
NOTE: Recommended Air Compressor is a 40-hp screw compressor, with outputs at 125 psi @ 150 cfm constant with a 200 gallon receiver tank. SDC Machine Standard Features Cleaning Cabinet Frame Construction and Internal Drive Components:
- Meets all OSHA, MSHA, UL, NEC, NFPA general safety guidelines
- All Electrical Enclosure are Nema 12 Rated
- All Pneumatic Components Supplied by Parker
- Mitsubishi PLC
- AC Motor Drive
- EAO Modular Switches
- Integrated Fully Reset able Fused Breakers
- All welded steel frame construction
- All Exterior Walls Covered In 14 Cold-rolled Sheet Metal
- Grade 5 & Grade 8 Hardware Used Throughout Assembly
- All interior and exterior pieces coated in 1000 Hour primer
- Interior and Exterior Final Finishes are either of safety blue & gray color weather resistant polyurethane paint depending on location
- Tough Lexan Safety Window
- Teflon Bushings
- Phos-Bronze Bearings
- Stainless Steel Air Cylinders
- Hardened Chain Drives
- All Wear Surfaces Case Hardened or Hard Chromed
- Hardened Steel Guides
- Brass Air Tips
- Interchange Nozzle Heads
- Sealed Roller Bearings
- Computer Controlled Electronics
- AC Motor Drives
- Quick Disconnect High Pressure Brass Air Fittings
- Long Life Electric Motors
- Easy to Understand Controls
- Off the Shelf Available Replacement Parts
Safety Features:
- Locking Lower Compartment Doors
- Locking Control Panel Enclosure
- Safety Interlock Switches on Top and Bottom Access Doors
- Easy Access Emergency Stop Switch
- Nema 12 Electrical Enclosure
|
|
|
